Applications » UHV

Product code: UHV Cryogen-free 3He

Overview

A compact cryogen-free ³He system for use an a UHV environment, sample in vacuum, uses a closed cycle cooler with vibration eliminated by a bellows system. A 1K stage allows full condensation of the ³He charge which extends the hold time at a base temperature of 300mK to 40 hours, and gives a fast regeneration time.

Options/customisation:

  • Further vibration isolation
  • Additional wiring
  • Coaxial cables
  • Wave guides
  • Line of sight ports
  • Base temperature: <270mK
  • Hold Time: 70 hours
  • 3he Charge: 7 litres

 Product code: DRYICE3 UHV


TO CONFIGURE YOUR SYSTEM,
TALK TO US TODAY: 01993 706 444

System components available

Product code: Sample in UHV Top Loading 3He Insert

Overview

A top loading into UHV 3He insert where the sample region is UHV compatible designed specifically for STM work.

  • Length to suit system
  • Base temperature <300 mK for >40 hours (no heat load applied)
  • Cooling power <320 mK for >6 hours with 400mW applied heat load
  • Stability below 1.2 K <±3 mK
  • 3He regeneration time 50 mins

Product code: 3ICETL UHV


TO CONFIGURE YOUR SYSTEM,
TALK TO US TODAY: 01993 706 444

System components available

Product code: Continuous Flow Cryostat Sample in Vacuum

Overview

An continuous flow sample in vacuum cryostats with a range of tails to suit your application.

  • A range of wiring options
  • Temperature range 1.2-800K
  • Tails diameter and length to suit

 Product code: ICEICLE


TO CONFIGURE YOUR SYSTEM,
TALK TO US TODAY: 01993 706 444

System components available

Product code: DRY Active Sorb for UHV Applications

Overview

A <7K DRY sorb for use in UHV to collect particals for further analysis. Cold down <1 hour and range of temperature controls. Supplied with temperature controller and lead.

Product code: DRYICEACTIVE SORB UHV


TO CONFIGURE YOUR SYSTEM,
TALK TO US TODAY: 01993 706 444

System components available