Cryogenic Spares » Cryogenics » Transfer Lines
A range of transfer tubes is available for normal short duration transfer. Constructed in stainless steel and vacuum insulated, they are available in rigid, demountable and flexible forms.
All transfer tubes are supplied with a robust stainless steel valve and removable siphon nozzles. Threaded siphon legs permit the use of the extension tubes.
These transfer tubes will be compatible with your dewar top fitting, ensure you forward your sizes to our sales department.
Alternative dewar leg, cryostat leg and span available upon request. Extension tubes also available
|Description||Dewar Leg Length (A)||Cryostat Leg Length (B)||Span (C)||Cat Number|
|Standard Flexible Transfer Tube||1.5m||0.5m||1.5m||ICEsf-050|
|Standard Flexible Demountable Transfer Tube||1.5m||1m||1.5m||ICEsfd-100|
|Standard Rigid Transfer Tube||1.5m||1.5m||1.5m||ICEsr -150|
|Standard Rigid Demountable Demountable||1m||1m||1m||ICEsrd-100|
|Alternative leg dewar leg, cryostat leg and span available upon request.
Extension tubes ordered to length.
|Description||Dewer Leg length (A)||Cryostat Leg Length (B)||Span||Code||Price||Qty||Basket|
|Standard Flexible Transfer Tube||1.5m||0.5m||1.5m||ICEsf-050||£980.00|
|Standard Flexible with Horizontal Demountable Joint||1.5m||1m||1.5m||ICEsfd-100||£1850.00|
|Standard Rigid with Horizontal Demountable Joint||1.5m||1.5m||1.5m||ICEsr -150||£980.00|
|Standard Flexible Single Elbow||1m||1m||1m||ICEsrd-100||£1850.00|
ICEmft01 - High efficiency, low loss Helium transfer tube. Dewar leg length 1300mm, Flexible section 1300mm, Dewar leg outer diameter of 12mm – (1/2”) One 90 Degree Elbow Design to operate with a Horizontal positioned side arm.
ICEmft02 - High efficiency, low loss Helium transfer tube. Dewar leg length 1300mm, Flexible section 1300mm, Dewar leg outer diameter of 12mm – (1/2”) Two 90 Degree Elbow Design to operate with a Vertical positioned syphon entry.
ICEmtf03 - A motorised drive for needle valve assemblies. 0-10 Volt DC with 2 x rotations.